Jinan lucky cnc electro-hydraulic servo bending machine uses the electro-hydraulic servo system to control the hydraulic system, and the lower computer controls the upper computer to push the cylinder to press the bending parts to complete the bending operation of the plate. The electro-hydraulic servo bending machine has the advantages of high working efficiency, high bending accuracy, and simple operation.
2. How to use electro-hydraulic servo bending machine
1. Warm up
Before using the electro-hydraulic servo bending machine, a certain period of preheating is required. The preheating time is generally about 30 minutes, and the heater can be automatically controlled by setting the temperature controller.
2. Debugging
After the preheating is completed, the electro-hydraulic servo bending machine needs to be debugged. The purpose of debugging is to determine the best working parameters, including stroke, pressure, etc.
3. Operation
After debugging is completed, the electro-hydraulic servo bending machine can be operated. You need to pay attention to the following aspects during operation:
(1) Operation process: Before operation, it is necessary to clean the working area and check whether the machine is normal. The specific operation process is as follows.
① Place the workpiece on the workbench and clamp both sides.
②Set the appropriate bending pressure and advancement position according to the width of the workpiece.
③Start the electro-hydraulic servo system to perform automatic bending operation.
(2) Operating skills: Correct operation of the electro-hydraulic servo bending machine can improve work efficiency and bending accuracy.
① Pay attention to safety and avoid getting caught with your fingers.
②Adjust the bending pressure and advancement position according to the steel plate material and thickness of the bent part.
③Use even force during operation.
3. Precautions
1. When using an electro-hydraulic servo bending machine, regular maintenance and upkeep of the machine is required to ensure the normal use of the equipment.
2. During operation, be sure to pay attention to safety to avoid accidents.
3. Follow the operating procedures and do not change the original parameters at will.
4. During the operation, if you encounter any problems, please deal with them in time to avoid unnecessary losses.
